Sponsored: We receive compensation from lending partners when applications are submitted.

October 19, 2026 · Equipment Capital Index

Cost Per Operating Hour: What a Machine Really Costs to Run

Contractors price jobs by the hour, the day, or the yard, but they often buy equipment by the monthly payment. That mismatch hides the number that matters most: what it actually costs to run the machine for one hour. If you do not know that figure, you cannot tell whether your rates cover the machine, whether renting would be cheaper, or whether a newer, pricier model would pay for itself.

This guide builds a cost-per-hour model step by step, runs it on an example excavator, and shows the most important lesson in equipment economics: how strongly the answer depends on how many hours the machine works each year. The inputs in the example are hypothetical placeholders, there to show the method. Replace them with your own records.

Two kinds of costs

Every machine has two groups of costs, and they behave differently.

Ownership (fixed) costs accrue whether the machine runs or sits. They include:

  • Depreciation, meaning the purchase price minus what you expect to sell it for
  • Interest on the loan
  • Insurance
  • Storage, yard space, and registration or property taxes

Operating (variable) costs rise with every hour of use:

  • Fuel
  • Maintenance and repairs, including wear items like tracks, tires, cutting edges, and hoses
  • Fluids, filters, and lubricants
  • Operator labor, if you want a fully loaded figure (the example below leaves it out so the machine cost is clear)

The reason this split matters: fixed costs get spread across hours. The more hours you work, the less each hour carries. That is the whole economic case for utilization.

The formula

cost per hour = (total ownership costs + total operating costs) / total hours

Taken over the period you plan to own the machine, with the resale value subtracted from the purchase price, this gives a cost per hour that includes the real cost of owning it, not just the payments.

A worked example

Take a full-size excavator like the Caterpillar 320 GC, which our dataset estimates at $185,000. Assume you finance it with 10% down over 60 months at an illustrative 8.25%, keep it five years, and then sell it. Everything below other than the loan math is a hypothetical placeholder.

Ownership costs over five years:

ItemAssumptionFive-year total
DepreciationBought at $185,000, sold at an assumed 45% of price ($83,250)$101,750
Loan interest$166,500 financed, 60 months at 8.25%about $37,300
InsuranceAssumed $4,500 a year$22,500
Storage and transportAssumed $3,000 a year$15,000
Total ownershipabout $176,500

Operating costs per hour (hypothetical):

ItemAssumptionPer hour
Fuel7 gallons an hour at $4.00 a gallon$28.00
Maintenance and repairsAssumed $16 an hour, averaged over the machine’s life$16.00
Total operating$44.00

Now the key variable: hours per year.

Hours per yearOwnership cost per hourOperating cost per hourTotal cost per hour
600about $58.84$44.00about $102.84
1,200about $29.42$44.00about $73.42
1,800about $19.61$44.00about $63.61

The same machine costs about $103 an hour to run if it works 600 hours a year, and about $64 an hour if it works 1,800. That is a gap of about 60% (the low-usage hour costs 62% more, or the high-usage hour is 38% cheaper), driven entirely by how much the fixed costs are diluted. At low utilization, you are paying a lot for a machine that spends most of its life parked.

Two simplifications are worth flagging. First, the example holds resale value constant across the scenarios. In reality a machine worked 1,800 hours a year would sell for less after five years than one worked 600, which raises the high-utilization cost somewhat. Second, maintenance cost per hour usually climbs as a machine ages, so an average over the whole life is a rough figure. Use your own service records where you have them.

What the payment hides

Notice that the loan payment, about $3,400 a month in this example, is not one of the lines in the table at all. The payment combines principal and interest. Principal is the other side of depreciation, not a separate cost, so counting both would double-count. The model above counts depreciation and interest, which together capture the economic cost of ownership.

This is why comparing machines by monthly payment can mislead. A cheaper machine with higher repair costs, or a thirstier engine, can cost more per hour than a pricier, more efficient one, even though its payment is lower.

Using the number

Set your rates. If your all-in cost is about $73 an hour before an operator, your rate has to cover that plus labor, overhead, and profit. Many owners are surprised to find they have been quoting rates that barely cover the machine.

Test rent versus buy. Compare your ownership cost per hour with a rental quote, adding fuel if the rental rate excludes it. If renting is cheaper at your actual usage, owning may not make sense. Our post on renting versus buying heavy equipment works through the break-even.

Compare machines. Run the same model on two options, such as a wheeled versus tracked loader. Our guide to compact track loaders versus skid steers does that for one pair. Or compare new against used: a used machine has lower depreciation and interest but may have higher repair costs. See new versus used equipment financing.

Decide how much machine you need. If the model shows your bigger machine only works 600 hours a year, a smaller one running more hours may be far cheaper per hour of useful work.

Time your replacement. The point where a machine’s cost per hour starts rising, because repairs are climbing faster than depreciation is falling, is often a good time to replace it.

Improving the inputs

The model is only as good as what goes into it. A few ways to firm up your numbers:

  • Fuel burn. Log fuel purchases and hours for a few months to get a real gallons-per-hour figure. Manufacturers publish typical consumption, but your conditions differ.
  • Repair history. Keep a record of every repair and wear part, with hours at the time. After a couple of years you will know your true maintenance cost per hour.
  • Resale value. Check sold prices of comparable machines at your planned selling age, not asking prices. Our post on equipment depreciation explains why market value and tax value differ.
  • Insurance and storage. Use your actual premiums and yard costs. Our post on insurance for financed equipment covers what drives the premium.
  • Hours per year. Be honest here. Use last year’s actual hours, not the hours you hope for.

Don’t forget the operator

The example excludes operator labor so the machine’s own cost is clear, but for pricing work you need it. An operator’s fully loaded cost, including wages, payroll taxes, and benefits, can easily rival or exceed the machine’s hourly cost, and it is the same whether the machine is owned or rented. That is another reason utilization matters: an idle operator on a running machine is the most expensive hour you will have.

Tax effects

Tax deductions, including Section 179 and bonus depreciation, change your after-tax cost of owning, but they do not change the machine’s economic cost per hour. Because the deductions only reduce taxes if you have income to offset, treat them as a separate analysis. Our post on Section 179 and bonus depreciation in 2026 explains the rules, and a CPA can model your specific situation.

The takeaway

The monthly payment is a cash-flow number, not a cost number. Cost per operating hour combines depreciation, interest, insurance, fuel, and repairs into one figure you can compare with your billing rates, with rental quotes, and with other machines. And the figure depends enormously on utilization: the same machine can cost about 60% more per hour at low usage than at high usage.

You can estimate purchase prices and payments on the machines you are considering on our heavy construction equipment pages, and use the comparison tool to look at two machines together. All figures here are estimates, and the example’s operating inputs are hypothetical. This article is general information, not financial advice.

See real financing estimates for heavy construction .