Sponsored: We receive compensation from lending partners when applications are submitted.

October 13, 2026 · Equipment Capital Index

Compact Track Loader vs. Skid Steer: Cost, Wear, and Financing

Walk onto any dealer lot and you will see the two machines parked side by side: a skid steer on four tires and a compact track loader on rubber tracks, often from the same manufacturer, with nearly identical horsepower and lift ratings. They look like the same machine with different feet. The price tags say otherwise, and the right choice depends far more on your ground conditions and your work than on the brochure.

This guide compares the two on purchase price, financing, wear, and resale, using real pairs from our own dataset, and gives you a way to decide. The prices are estimates, not quotes, and the payments use an illustrative 8.25% APR over 60 months with 10% down.

What actually differs

At the most basic level, both machines are compact loaders with lift arms and a bucket or attachment. The difference is how they meet the ground.

Skid steers (wheeled) use four tires. They are generally lighter, cheaper to buy, faster across firm surfaces, and cheaper to maintain. They can be hard on turf and soft ground, because the tires concentrate the machine’s weight and spin as they turn.

Compact track loaders (CTLs) use rubber tracks over an undercarriage of rollers and idlers. They spread weight over a larger area, which gives lower ground pressure, better traction in mud, sand, and snow, and a smoother ride. They cost more to buy and carry a wear item, the undercarriage, that wheeled machines do not have.

A real pair, side by side

Kubota sells both a skid steer and a track loader in the same class, which makes for a clean comparison. Using our dataset:

Kubota SSV75 (wheeled)Kubota SVL75-3 (tracked)
Estimated price$63,000$76,900
Horsepower74.374.3
Operating weight8,157 lb9,490 lb
Rated operating capacity2,690 lb2,680 lb
Estimated payment (60 mo, 10% down)about $1,156about $1,412

You can see both on our pages for the Kubota SSV75 and the Kubota SVL75-3. Same engine, nearly the same lift capacity, and a price difference of about $13,900. Over a five-year loan that is roughly $15,300 more in payments, or about $255 a month, to put the machine on tracks.

Is it worth it? That depends entirely on whether the tracks let you do work, or avoid problems, that tires cannot.

When tracks earn their premium

Soft, wet, or uneven ground. Mud, sand, loose soil, and snow are where tracks shine. A wheeled machine in these conditions digs ruts, gets stuck, and wears its tires quickly. If you regularly work in them, tracks can mean the difference between working and waiting for the ground to dry.

Finished surfaces you want to protect. Landscaping, lawns, and sports turf suffer under spinning tires. Tracks tear up less.

Slopes and traction-hungry work. Grading and pushing material uphill are easier with the better traction and flotation of tracks.

Operator comfort on rough terrain. Tracks generally give a smoother ride over uneven ground, which matters if your operator spends long days in the seat.

When wheels win

Hard, firm surfaces. On pavement, concrete, compacted gravel, and warehouse floors, tires are faster, cheaper, and do not suffer from the scrubbing wear that tracks experience on abrasive hard surfaces.

Lots of travel. Wheeled machines move quicker across a site, which saves time on jobs that involve a lot of repositioning.

Tight budget. A lower purchase price means a lower payment, lower insurance cost in many cases, and less capital at risk.

Simplicity. Fewer wear parts means fewer surprise repair bills.

The undercarriage question

The most important financial difference between the two machines is the wear item. A CTL’s tracks and undercarriage components wear with use, and replacing a set of tracks is a significant expense that a skid steer owner never faces in the same way (though tires wear out too, and replacement tires are not free).

How fast tracks wear depends on conditions and habits:

  • Abrasive surfaces such as rock, concrete, and asphalt wear rubber faster.
  • Aggressive turning on hard ground scrubs tracks. Operators who make wide, gentle turns get more life from them.
  • Maintenance matters: keeping the undercarriage clean, checking track tension, and avoiding debris buildup extend track life.

When you evaluate a used CTL, undercarriage condition is a central question, and it can swing the machine’s value by thousands of dollars. Our post on inspecting used equipment before you finance covers what to check. On the financing side, lenders know this, which is why age and hour limits on used track machines can be stricter than on wheeled ones. See our guide to new versus used equipment financing for the general pattern.

Resale value

Track loaders generally hold their value well in the used market, partly because demand is strong and partly because the higher purchase price leaves more room to retain. But the resale value of a used CTL depends heavily on the remaining undercarriage life. A machine with fresh tracks sells for a premium; one that needs tracks sells at a discount equal to roughly the cost of replacement, and often more.

Wheeled skid steers also hold value, and since they have fewer expensive wear items, their depreciation tends to follow hours and condition in a more predictable way. Neither machine is a bad store of value, but the track loader carries more variance.

Financing considerations

Lenders treat both as mainstream, easy-to-resell collateral, so approval standards are similar. A few practical differences:

  • Higher price, higher payment. A CTL’s larger price means a larger payment and, if you are putting down a percentage, a larger down payment.
  • Attachments. Both machines run the same kinds of attachments, such as buckets, forks, augers, and mulchers. Financing them with the machine, on the same invoice, is usually cheaper than buying them later.
  • Hour and age caps. For used machines, ask how the lender treats tracked versus wheeled equipment.
  • Term. A longer term lowers the payment but increases total interest. Our guide to the real cost of equipment financing works through how much.

Tax and ownership costs

Both machines generally qualify for Section 179 and bonus depreciation, so the first-year deduction is available either way. For equipment placed in service after January 19, 2025, 100% bonus depreciation applies to qualifying purchases. See our post on Section 179 and bonus depreciation in 2026 for how it works.

Ownership costs diverge in the long run: tracks or tires, undercarriage service, and fuel all differ somewhat. Estimate your cost per hour for each option. We show how in our post on cost per operating hour.

A simple decision guide

Ask yourself:

  1. What does the ground look like on most of my jobs? Soft or wet points toward tracks; firm and paved points toward wheels.
  2. How much of my work is on surfaces I must not damage? Lots of turf or finished ground favors tracks.
  3. How much does the extra $13,000-plus change my payment and my cash? If it strains the budget, wheels are the safer pick.
  4. Could I rent a track loader for the occasional wet job? If so, buying wheels and renting tracks for the exceptions can be the cheapest combination. See our post on renting versus buying.
  5. How long will I keep it? The longer you own, the more the undercarriage question matters.

The takeaway

A track loader is not a better skid steer; it is a different tool with a higher price, a wear item, and real advantages on soft ground and finished surfaces. If your work lives on firm ground, wheels give you nearly the same capability for less. If your work lives in mud, sand, snow, or turf, tracks can pay for themselves in uptime and avoided damage.

Compare more pairs with estimated payments on our compact track loader pages and skid steer pages, or use the comparison tool. Figures are estimates for planning, not quotes. This article is general information, not financial or tax advice.

See real financing estimates for heavy construction — compact track loaders .