Sponsored: We receive compensation from lending partners when applications are submitted.

October 31, 2026 · Equipment Capital Index

Standby vs. Prime Generators: Sizing, kW vs. kVA, and What the Payment Looks Like

Generator shopping looks simple until you read the spec sheets. One model is listed at 150 kW, another at 187 kVA, a third at “125 kW standby, 113 kW prime.” Are they the same machine? Which one is big enough for your building? And does it matter that one is built for emergencies and another for running every day?

It matters a great deal, both for whether the generator does its job and for what you pay. This guide explains the rating classes, shows how to size a unit, untangles kW and kVA, and puts monthly payments on four real models from our dataset. Prices are estimates and payment examples use an illustrative 8.25% APR over 60 months with 10% down. None of it is a quote.

Standby, prime, and continuous: three ways to run the same engine

Generator ratings follow industry definitions (commonly the ISO 8528 standard), and each describes a different duty:

  • Standby. The generator runs only when utility power fails. Annual running hours are limited, and the load is usually variable. A standby rating is the highest number for a given engine and alternator because the machine is not expected to run for long stretches.
  • Prime. The generator is the main power source, or runs for unlimited hours a year with a variable load. Typical uses are remote sites, events, and construction. A prime rating is lower than the standby rating for the same unit, because the engine is working harder over more hours.
  • Continuous. The generator runs at a constant load around the clock. This rating is lower again, and it applies to things like baseload power or some industrial processes.

The practical lesson is that the same physical generator might carry a 150 kW standby label and roughly a 135 kW prime label. Comparing a standby number on one data sheet with a prime number on another is the most common sizing mistake. Always compare like with like, and buy for how you will actually run it.

kW versus kVA

Two units appear on every spec sheet, and they measure different things.

  • kW (kilowatts) is real power, the part that does work: turning motors, heating, lighting.
  • kVA (kilovolt-amperes) is apparent power, the total the alternator must supply, including the part that does no useful work.

The two are tied together by the power factor. Most generators are rated at a power factor of 0.8, so:

  • kW = kVA × 0.8
  • kVA = kW ÷ 0.8

That means a 100 kW generator is also a 125 kVA generator, and a 150 kW unit is about 187.5 kVA. If you are comparing a quote that lists kW against one that lists kVA, convert before deciding which is bigger. Motors and some electronic loads have lower power factors than the generator’s rating, which is one reason sizing needs a margin.

Sizing a generator without overbuying or underbuying

Undersizing is obvious: the unit overloads or the voltage sags. Oversizing is quieter and still expensive. A generator running at a very small fraction of its capacity for long periods can suffer from poor fuel combustion and carbon buildup, a problem often called wet stacking in diesel units. You also pay more up front and more per month.

A sensible process:

  1. List every load you need to run, with its running watts or kW.
  2. Add starting loads. Motors, compressors, pumps, and HVAC draw a surge when they start, often several times their running load. The largest motor start is frequently what sets the minimum size.
  3. Decide what you will not run. In an outage, you may shed non-essential loads. A generator for critical circuits is smaller than one for a whole facility.
  4. Apply a margin, commonly 20 to 25 percent, for growth and for the power-factor and altitude or temperature effects that reduce output.
  5. Check phase and voltage. Three-phase and single-phase units are different machines, and the voltage must match your equipment.
  6. Confirm with the manufacturer or an electrician. Many manufacturers offer sizing tools, and an electrician or engineer can do a load study. For a commercial building, do not guess.

If you are not sure about starting loads, ask a professional. A wrong estimate is expensive in either direction.

Four real models and what they cost per month

Here are four generators from our dataset, from a mid-size standby unit to a larger mobile rental-grade set. Prices are estimates calibrated to similar machines, and the figures are not quotes.

ModelEstimated pricePayment (60 mo, 10% down)
Kohler 100REOZJF$42,000about $771
Generac SD150$62,000about $1,138
Caterpillar XQ125$98,000about $1,799
Caterpillar XQ230$135,000about $2,478

Notice the spread. A stationary commercial standby generator sized in the 100 to 150 kW range costs a fraction of a trailer-mounted prime-duty set with a similar rating, because mobile units are built with sound-attenuated enclosures, integrated fuel tanks, trailers, and tighter duty ratings. Browse more on our generator pages and compare any two in the comparison tool.

Things the payment does not include

The price of the generator is only part of the project:

  • Installation. A permanent standby generator needs a pad, an automatic transfer switch, electrical work, permits, and fuel connections. These can be a large share of the total.
  • Fuel supply. Diesel needs a tank and a way to keep fuel fresh. Natural gas needs adequate gas service. Propane needs storage.
  • Emissions and noise rules. Engines are subject to emissions requirements, and many sites have noise limits. Check local rules before you buy.
  • Maintenance. Standby generators need regular exercising, fluid and filter service, and battery replacement. A generator that has not been maintained may not start when you need it.
  • Load bank testing. Lightly loaded generators are sometimes tested under load to keep them healthy.
  • Insurance. Covered in our guide to insurance for financed equipment.

Rent or buy

Generators are widely available for rent, which makes the rent-versus-buy question worth working through, especially for prime power on a project.

  • Buy when the generator will run regularly, or when it is an emergency system that a facility needs on permanent standby. Rental is not a plan for a hospital or a data room.
  • Rent for temporary projects, events, and one-off outages, or when you cannot predict the size you need.

Our posts on renting versus buying and cost per operating hour show how to compute the break-even for your use.

Financing notes

Generators are common, easily valued collateral, so financing is widely available.

  • Smaller units fall into the small-ticket range, where streamlined programs and short applications are common. See our guide to financing generators, compressors, and welders.
  • Larger and mobile units are underwritten like other equipment; see what lenders look at.
  • Installed standby systems are sometimes financed together with installation costs. Ask whether installation can be included, because a lender may finance only the equipment invoice.
  • Used units vary a lot in condition, and hours on a standby generator can understate its age. Use our inspection checklist and ask for maintenance records.
  • Tax treatment. Business-use generators may qualify for Section 179 and bonus depreciation, though real property improvements such as a permanent installation can be treated differently. See our post on Section 179 and bonus depreciation in 2026, and ask your CPA.

A buyer’s checklist

  1. Decide how you will run it: standby, prime, or continuous.
  2. Add up loads, including starting loads, and decide what to shed.
  3. Convert kW and kVA so every quote is on the same basis.
  4. Match phase, voltage, and fuel type.
  5. Price the whole project: transfer switch, installation, fuel, permits, and maintenance.
  6. Check noise and emissions rules for your site.
  7. Compare rent against buy for your actual run hours.
  8. Compare financing offers on total cost.

The takeaway

A generator is only as good as its match to the job. Know whether you are buying standby, prime, or continuous capacity, size to your real starting loads with a modest margin, convert kW and kVA so you are comparing the same number, and budget for installation and maintenance on top of the machine. The payment on the unit itself is often the smaller part of the decision.

Browse estimated prices and payments on our power equipment pages. All figures are estimates, not quotes. This article is general information, not electrical engineering, financial, or tax advice. Have a qualified electrician size and install any generator.

See real financing estimates for power equipment — generators .